top of page
Ultra 32mm tube (1-1/4") heater coil with detachable tails

Ultra 32mm tube (1-1/4") heater coil with detachable tails

Very large scale and extremely robust hot tub heater coil, made from thirty six and a half metres of 32mm, 304 stainless steel tubing. Reinforced inside with lengths of 20mmx20mm square section stainless steel. 

 

The model pictured has lower tails, but the standard version of this coil comes with one upper and one lower tail. 

 

This model is only available with detachable tails. The tails are attached and detached via 1" BSP threaded ends and 1" stainless steel sockets. 

 

Ideal for using as part of a set-up to gently heat very large quantities of water using responsibly-sourced firewood - no electricity required. Please note that this does not mean it will turn a swimming pool into a hot tub - it will take the chill off the water, but it will not heat thousands of litres to a high temperature.

 

Diameter of approx 600mm. Height is approximately 550mm. Please note that if you need the coil to very exact specifications, please contact us first.

 

You can add heat-resistant hose, brass bulkhead connectors and more to this coil. Check out the other items in our shop and just click 'add to cart'. 

 

Heat-resistant hose

Brass bulkhead connector options

Safety item - downcomer tube for warm water outlet tube

 

PLEASE NOTE THAT THIS ITEM HAS AN EXTENDED MANUFACTURING TIME. WE WILL CONTACT YOU AFTER PURCHASE TO ADVISE YOU OF THIS. 

 

Please note that this item is extremely heavy (around 50kg) and will be delivered on a pallet. 

  • SAFETY INFORMATION

    Ensure that the coil is placed a safe distance from your hot tub and is both stable and secure. Please take particular care of how and where you use your heater coil in any settings where children or animals may be present - safety should be paramount at all times. Any attachments/ connectors/high temperature hose you choose to use should be well clear of the flames.

    It is advisable to conduct a brief common sense safety check of the setup before firing the coil. The coil should be set away from any thoroughfare and flammable materials etc.  

    Please note that your cold water inlet and hot water outlet feeds must be below the water level in your hot tub at all times when your coil is in use. If the water line in your tub is below the level of your warm water outlet feed from your coil (or drops below it while you are using your tub) water will stop flowing through your coil and just sit in it, becoming extremely hot. This is called 'dry firing' the coil, which is extremely dangerous and will result in scalding hot water or steam coming out of the hot water outlet. 

£1,500.00Price
Quantity
Product Page: Stores Product Widget
bottom of page